Sunday 2 February 2014

The mighty 'mitred' square!




I first came across 'constructional' knitting in a magazine a couple of years ago; learning to make and join 'mitred' squares opened up a whole new world for me and I was quickly addicted! One of the chief bonuses is there are NO seams to sew up! :-)

I've included some of my square blankets in previous posts ( here and there for example ) but when I was asked by some members of our embryonic church crafting group to explain the technique I decided I needed to do something easy for people to follow! One of the activities we take part in is making blankets for charities worldwide; some of our more 'senior' knitters can only manage to knit the individual squares - these are then sewn up by those of us with more nimble fingers, as we'd like EVERYONE to be able to take part even if they're not able to cope with the growing weight of a blanket. Meanwhile, to save sewing-up, the more 'adventurous' amongst us asked me how to do the construction method.

So, without wishing to teach any of you experienced knitters out there how to 'suck eggs' (and I know there are other examples out there on the 'web) - here's my first attempt at a tutorial!

-oOo-

How to knit a mitred square

Mitred squares require an odd number of stitches. For the pictures in this example I used 33 stitches. 

(Edited 19/11/14). I've been asked about altering the sizes - the basic rule of thumb is: always cast on an odd number of stitches and always decrease over the central 3 stitches. Using DK yarn, 4mm needles and casting on 55 stitches will yield a 6" square, approx., following the instructions below but using the stitch counts in brackets.

Cast on 33 (55) stitches.
1st row. K to last st; P1
2nd row. Sl 1, K to last st; P1
3rd row. Sl 1, K to middle 3 sts; (sl 1, K2tog, PSSO); K to last st; P1
4th row. Sl 1, K to last st; P1

 

Repeat 3rd and 4th rows until 3 sts remain; after final 4th row K remaining 3 sts tog.
Now you have completed the first square. Well done! Draw yarn through loop and cut end.



To start the 2nd square, pick up and knit 17 (28) sts down one side of 1st square:



Then continue and cast on 16 (27) more sts. You should now have 33 (55) sts on needle:
 


Next row: K to last st.; P1
Now continue to rep 3rd and 4th rows as on previous square until completed:




Continue to add squares until desired width is achieved. You will see that the mid-row decreases create a diagonal ‘line’.

Now to create a new row of squares on top!
Cast on 16 (27) sts, then pick up 17 (28) sts along edge of block, like this:



Again, you’ll have 33(55) sts on needle.
Next row: K to last st.; P1
Continue 3rd and 4th row repeats as before and complete the square:



So, 1st square was  Blue; 2nd square was Pink; 3rd square was Green. To make the 4th square, this time you’ll be picking ALL your stitches like this:

From the top left hand side of the green square, pick up 16 (27) sts; pick up 1 st at the corner of the blue square:
then continue to pick up a further 16 (27) sts along the adjacent side of the pink square.



You should now have 33 (55) sts on needle. K to last st; P1. Continue as before, repeating the original 3rd and 4th row:
 



If you continue in this manner, always adding squares right to left, you will see that the diagonal ‘lines’ run all in the same direction. 

If you want to create a diagonal zig-zag with each new row of squares you just need to alter the direction you add the squares:



This time you’ll be placing your squares left to right. See pic. above.

Start picking up stitches from the right hand side of the square below (purple) and pick up 17 (28) sts, then cast on a further 16 (27). Now you have your 33 (55) sts in total, carry on and complete the square.
Repeat the process to add a new square:
Start from the top right of the green square and pick up 17 (28) sts. Note: the 17th  (28th) stitch will be picked up from the corner of the square below (purple, in this case), then continue to pick up a further 16 (27), making 33 (55) sts. in total.




Can you see the change of diagonal direction? Just alternate between these two methods for each row of squares and you’ll see the zigzag appear!

-oOo-


There - I hope this explains the technique easily! Picking up and knitting stitches for each new square saves the laborious procedure of sewing the squares together - and if you turn your work over you'll see it also gives a nice smooth finish!




The only dilemma with creating blankets in this way is - which colour shall I use next.....! ;-)

15 comments:

  1. Love it. I am up to square #4. It's nice to have something easy to pick up and put down when I'm watching telly ;)

    ReplyDelete
  2. Holy moly, I am stunned at the simplicity. My mother would have been in knitting paradise, as I could still be over this one.

    ReplyDelete
    Replies
    1. Joanne - do try it! (& let me know how you get on!)

      Delete
  3. I love doing mitred squares - so easy but so effective!

    ReplyDelete
    Replies
    1. I have never seen these before and I love them. So effective.

      Delete
    2. Linda - have a go! I warn you, though - it becomes addictive! ;-)

      Delete
    3. Daisy - it's a fantastic way to join squares, isn't it! I'd love to see what you've knitted! :-)

      Delete
  4. A million thanks for this. Sewing squares together is not my strong point and it probably takes me longer than knitting the squares. I will do it like this next time.

    ReplyDelete
    Replies
    1. Una - I find casting on 55 sts with 4mm needles & DK yarn yields a 6" square, if that's any help with your future projects! ;-)

      Delete
  5. Your instructions and method of joining look so much easier than the other pattern which I have that I have sent your pattern to myself.

    ReplyDelete
  6. Thanks so much for doing this. I was examining a blanket someome kniotted for a friend and just couldn't work out what she had done. Now Voila!! Looking forward to giving it a go. No sewing. Woo Hoo.

    ReplyDelete
  7. i am not understanding how to slip the first stitch of the row... should it be done purl wise? for some reason its not looking like a V rather looks like the edge of a normal garter stitch piece... i had it to begin with until i messed up and now for the life of me i cant reproduce what i was doing.. please help

    ReplyDelete
  8. I slip 1st st knitwise and purl last st on every row. Hope that helps

    ReplyDelete